No products in the cart.
Accessory Products, Drying Time Accessories, Drying Time Recorder, Drying time recorder accessories
Spare needles Drying Time Recorder, set of 12 AB3604
Spare needles Drying Time Recorder, set of 12
$149.00
Spare needles Drying Time Recorder, set of 12
FITS DRYING TIME RECORDER 230/115VAC AB3600
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Conveyor Ground Tester
Conveyor Ground Test – LD5900
Conveyor ground test with five steps which informs you whether items to be coated are sufficiently grounded. Designed for electrostatic coating applications.
A poor ground of the pieces to be coated may result in a poor quality of the electrostatic coating work. Coating thickness may not be sufficient or the pieces may not be even covered.
Consult your paint manufacturer or the supplier of your spray equipment for correct values.
The LD5900 is a low cost, easy to use ground check that is battery operated.
SKU: LD5900 - DFT Dry Film Thickness Gauges, Dry Film Thickness
POSIPEN A – LD6000
PEN TYPE FERROUS THICKNESS GAGE .25-20 MILS
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Used for:
Small, hot or hard-to-reach surfaces
Spot Checks – conveniently fits in a shirt pocket
Hot Sprayed CoatingsIdeal for:
Refineries, petrochemical plants
Platers – electroplating, chrome, zinc, galvanizing
Powder coatersSKU: LD6000
