No products in the cart.
ASTM D1653, ASTM E96, ISO 7783 (supersedes NF T30-018), Moisture, Moisture Meters
PERMEABILITY CUPS – VF2200, VF2201
VF2200
TQC Permeability Cup 10cm2
Sheen Instruments equivalent product code: SH1003
VF2201
TQC Permeability Cup 25cm2
Sheen Instruments equivalent product code: SH1003A
Documents
permeability-cups-vf2200-VF2201-d44-1-14.pdf (266.46 KB)
permeability-cup-vf2200-m44-14.pdf (314.63 KB)
Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems and related products. The Permeability cup consists of a cup, seal ring and cover ring. The seal ring is designed to prevent turning when closing the cover. The Permeability cup is suitable for testing both self-supporting coating and non-self-supporting coatings. Water-vapor transmission is of interest for high humidity conditions. The wet cup method is thus the reference method for determining water-vapor transmission, if agreed up on otherwise, other procedures or conditions the dry cup method may be used.
| Weight | .5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Model | VF2200 – TQC SHEEN Permeability Cup 10cm2, VF2201 – TQC SHEEN Permeability Cup 25cm2 |
Related products
- Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140
TAPE FOR ADHESION TEST (ISO 2409 1999) – SP3020 or SP3025
Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140TAPE FOR ADHESION TEST (ISO 2409 1999) – SP3020 or SP3025
Adhesion tape 3M 8981 50mx25mm
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
SKU: n/a - Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250
