No products in the cart.
Film Application
Micrometer Film Applicators – VF1820 to VF1825
Micrometer or Micrometric Film Applicators
Micrometer Film Applicators
Adjustable Micrometer Film Applicators. The applicator blade can be adjusted in 10 μm increments by means of 2 micrometer heads, over a gap size from 0 to 8 mm.
The micrometric applicator offers the user flexibility to adjust the optimum gap size for the sample application. Ideally suited to research projects where small variations in film thickness need to be evaluated accurately.
VF1820
Micrometric film applicator 75 mm wide
VF1821
Micrometric film applicator 100mm wide
Sheen Instruments equivalent product code: SH1117/100
VF1822
Micrometric film applicator 150mm wide
Sheen Instruments equivalent product code: SH1117/150
VF1823
Micrometric film applicator 200mm wide
Sheen Instruments equivalent product code: SH1117/200
VF1824
Micrometric film applicator 250mm wide
VF1825
Micrometer Adjustable Applicator 300mm wide
Documents
Micrometer-Film-Applicators-sh0335-d44-12.pdf (174.71 KB)
Micrometer-Film-Applicators-sh0335-m44-2-12.pdf (314.35 KB)
| Weight | 1 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Model | VF1820 – Micrometric film applicator 75 mm wide, VF1821 – Micrometric film applicator 100mm wide, VF1822 – Micrometric film applicator 150mm wide, VF1823 – Micrometric film applicator 200mm wide, VF1824 – Micrometric film applicator 250mm wide, VF1825 – Micrometer Adjustable Applicator 300mm wide |
Related products
- Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a - Film Application
8-sided Film Applicator – Octoplex – VF1550
8-Sided film applicator 25,50,75,100,125,150,175 and 200µm
Sheen Instruments equivalent product code: SH1114Multifunctional film applicator (Octoplex) with 8 pre-defined thickness sides for
applying paint-films of: 25, 50, 75, 100, 125, 150, 175, 200 micron. Film width 60 mm.SKU: VF1550 - Film Application
BIRD-TYPE FILM APPLICATORS, SINGLE GAP
TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
Some models are equipped with removable guidance plates for straight application.
We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
