Mandrel set ASTM for SP1822 Bend Test – SP1833
$492.00
Mandrel set ASTM for SP1822 Bend Test – SP1833
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
• The blade holder is kept at a set distance from the surface with the aid of two wheels (ball bearings). Reproducible test results guaranteed.
• Ergonomically shaped handle
• Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards.
Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer than other designs.
The TQC Conical Bend Test “Basic” is a simplified version of the TQC Conical Bend Test “Pro” (SP1830) It is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522. The conical shape of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating over any diameter between 3.1 and 38 mm in one single test. The sample panel is secured by means of two clamping knobs which has to be tightened and untightened by turning respectively clockwise or anti-clockwise.
Adhesion tape 3M 8981 50mx25mm
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
