Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3″ reference discs.
Comparators for determining surface roughness by touch and sight. Conforms to ASTM D4417. The KTA standard has 5 different grades of roughness and is available in three different versions. Available in Imperial units only.
$151.00 – $345.00
The Keane-Tator Surface Profile Comparator assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3″ reference discs. The blast cleaned surface is visually compared to five segments on the reference disc through a hand held illuminated magnifier. Three reference discs are available; the disc selected is based on the abrasive used to prepare the steel surfaces. Reference disc choices include one for surfaces prepare with sand, one for surfaces prepared with steel shot and a third for surfaces blast cleaned with a grit or slag abrasive. Each disc is a high purity nickel electro-formed copy of a master disc duplicated to within +/- 50 microinches. The standard kit includes a choice of one reference disc (choose upon ordering) in a vinyl pouch and an illuminated magnifier equipped with a magnet to hold the reference disc in place during inspections. Conforms to ASTM D4417, Method A.
Comparators for determining surface roughness by touch and sight. Conforms to ASTM D4417. The KTA standard has 5 different grades of roughness and is available in three different versions. Available in Imperial units only.
KTA-keane_ld2051_d44-1-12 (158 KB)
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Surface Profile | Sand Comparator Disc 372/S, Grit/Slag Comparator Disc 372/G, Shot Comparator Disc 372/SH, Set of All 3 Surface Profiles |
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.
Colorimeters with precision. The X-Rite RM200QC Imaging Spectrocolorimeter bridges the gap between color appearance and material color — from incoming material batches to outgoing product shipments — in an elegant, portable unit that fits comfortably in your hand.
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.
Surface treatment:
polished
Overall accuracy:
± 2 µm
*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
