No products in the cart.
Pictorial Surface Standards
ISO 8501-3:2006 Illustrated Edition – LD3044
ISO 8501-3:2006 Illustrated Edition
$110.00
ISO 8501-3:2006 Illustrated Edition
Describes preparation grades of welds, cut edges and other areas, on steel surfaces with imperfections. Such imperfections can become visible before and/or after an abrasive blast-cleaning process. The preparation grades given are to make steel surfaces with imperfections, including welded and fabricated surfaces, suitable for the application of paints and related products.
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Pictorial Surface Standards
ACT Orange Peel Standards
The ACT Orange Peel Standards consist of ten 4×6 inch panels with graduated degrees of orange peel (flow) from rough to smooth. Each panel within the set is painted black and labeled with a corresponding flow rating (orange peel) from 1 to 10.
SKU: ACTOrangePeel-GLG - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Pictorial Surface Standards
Tank Coatings Condition Guide – LD3075
A guide to assist ship’s staff in the assessment of tank, hold and space coatings of existing ships for the purpose of determining compliance with the Rules and Regulations for the Classification of Ships. The guide handles the definition of the tank coating condition in Good / Fair / Poor classification. It also contains the IACS methodology to divide tanks into a number of smaller “areas under consideration” which can easily be identified. Further are included schematics to help defining area determination, percentage of coatings breakdown for specific ship structures and a comparison of common rust scales. A series of full color pictures of tank coatings in various conditions and a section that describes and shows the hotspots for corrosion and other common defects is also part of the guide.
The last section contains sketched indicating common nomenclature and terminology applied to typical structure of major ship types.
Year of publication: 2008
Size: 95 x 135 mmSKU: LD3075 - Pictorial Surface Standards
SSPC-VIS 3 PICTORIAL SURFACE STANDARD HAND | POWER TOOL
Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning
Contains a series of 43 full-color reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). Also contains photos of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted, and additional explanatory notes.
SKU: SSPC-VIS 3 - Pictorial Surface Standards
SSPC-VIS 5|NACE VIS 9 Wet Abrasive Blast Cleaning –
Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning
Pictorial Standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition, with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near-white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.
SKU: SSPC-VIS 5
