No products in the cart.
Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
CLAMP-TYPE AIR PROBES FOR CURVEX DATALOGGER CX2020,22,23,24,26
TQC Clamp-type probes for measuring air temperature.
ORDERING INFORMATION
CX2020
TQC Clamp type air probes for CurveX Datalogger
cable length: 1500 mm
Range: 0 – 300ºC
Max. object thickness: 20 mm
CX2021
TQC Clamp type air probes for CurveX Datalogger
Cable length: 3000 mm
Range: 0 – 300ºC
Max. object thickness: 20 mm
CX2022
TQC Clamp type air probes for CurveX Datalogger
Cable length: 5000 mm
Range: 0 – 300ºC
Max. object thickness: 20 mm
CX2023
TQC Clamp type air probes for CurveX Datalogger
Cable length: 1500 mm
Range: 0 – 480ºC
Max. object thickness: 20 mm
CX2024
TQC Clamp type air probes for CurveX Datalogger
Cable length: 3000 mm
Range: 0 – 480ºC
Max. object thickness: 20 mm
CX2026
TQC Clamp type air probes for CurveX Datalogger
Cable length: 10500 mm
Range: 0 – 300ºC
Max. object thickness: 20 mm
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
| Choose Option: | CX2020: Curve-X air probe (Type=clamp, L=1.5m, T=300°C/572°F), CX2021: Curve-X air probe (Type=clamp, L=3m, T=300°C/572°F), CX2022: Curve-X air probe (Type=clamp, L=5m, T=300°C/572°F), CX2023: Curve-X air probe (Type=clamp, L=1.5m, T=480°C/896°F), CX2024: Curve-X air probe (Type=clamp, L=3m, T=480°C/896°F), CX2026: Curve-X air probe (Type=clamp, L=10.5m, T=300°C/572°F) |
Related products
- Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
MAGNETIC PROBES FOR CURVEX DATALOGGER CX206, 69, 73
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesMAGNETIC PROBES FOR CURVEX DATALOGGER CX206, 69, 73
TQC Samarium Cobalt Magnet probes to measure air temperature in box ovens and conveyor ovens in the powder coating industry. Ideal for measuring the temperature profiles of the oven during the curing process.
SKU: n/a - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695
