No products in the cart.
Related products
- Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140
Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Adhesion tape 3M 8981 25mm x 50m
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
SKU: SP3025 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856 - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
