No products in the cart.
Uncategorized
Digital Laser – Touch Tachometer – LU2000
Specification Measuring Range: PHOTO TACH 2.5 to 99. 999 RPM CONTACT TACH 0.5 to 19,999 RPM SURFACE SPEED 0.05 to 1,999.9 (m/min.)
Resolution: PHOTO TACH 0.1 RPM(2.5 to 999.9RPM) 1RPM(over 1000 RPM) CONTACT TACH 0.1 RPM (0.5 to 999.9RPM) 1 RPM (over 1000 RPM) SURFACE SPEED 0.01 m/min. (0.05 to 99.99m/min) 0.1 m/min (over 100m/min)
$295.00
Specification Measuring Range: PHOTO TACH 2.5 to 99. 999 RPM CONTACT TACH 0.5 to 19,999 RPM SURFACE SPEED 0.05 to 1,999.9 (m/min.)
Resolution: PHOTO TACH 0.1 RPM(2.5 to 999.9RPM) 1RPM(over 1000 RPM) CONTACT TACH 0.1 RPM (0.5 to 999.9RPM) 1 RPM (over 1000 RPM) SURFACE SPEED 0.01 m/min. (0.05 to 99.99m/min) 0.1 m/min (over 100m/min)
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
WIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesWIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
SKU: n/a - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Accessory Products, Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250
