Spare glass plates for drying time recorder option, 2 pcs AB3512
$104.00
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
• The blade holder is kept at a set distance from the surface with the aid of two wheels (ball bearings). Reproducible test results guaranteed.
• Ergonomically shaped handle
• Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards.
Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well
The CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines.
It’s a 4-channel temperature datalogger built in a sturdy machined aluminium case that fulfils the basic needs for quality control in powder coating applications. Its ease of use and affordable price level makes it the ideal job-coaters instrument.
To use a CurveX 3 Basic to the fullest an insulation box, heat absorber/bracket and probes are necessary. All CurveX insulation boxes and CurveX probes, and the single heat absorber / bracket can be used with the CurveX 3 Basic. See the accessory list
• Operate through only 3 large buttons
• Meaningful feedback of multi coloured LED’s
• Factory calibrated for immediate use, calibration certificate included
• Downloads data through a standard USB port
• Rechargeable battery pack through USB connector
• Large memory of max. 160.000 readings
• Memory for 10 different batches, automatically overwrites the oldest results
• Programmable “paint type” memory for immediate “pass / fail” result
• Flat design, only 16 mm, for use in low clearance ovens
• Compatible with Ideal Finish Analysis software
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
The ideal tool for the frequent user and for testing on hard substrates such as metal.
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
