The ACT Orange Peel Standards consist of ten 4×6 inch panels with graduated degrees of orange peel (flow) from rough to smooth. Each panel within the set is painted black and labeled with a corresponding flow rating (orange peel) from 1 to 10.
$795.00
Thousands of customers use these panels to visually evaluate the appearance of painted parts using a consistent, known standard. THESE PANELS ARE VISUAL STANDARDS ONLY.
| Weight | 4 lbs |
|---|---|
| Dimensions | 10 × 10 × 11 in |
The Fitz’s Atlas 2 of coating defects is a reference manual with over 300 color images, providing a clear and concise description of all problems that could occur, as well as their possible causes. The book is divided into the following sections:
Welding faults
PreSurface conditions
Coating defects
Microscopy
Marine fouling.
In 2007 updated version of the standard measure for the visual evaluation of rust and purity levels of non-coated steel. Also known as the “Swedish steel blasting grades” SS 05 59 00 (Sa). Contains high-quality colour photographs for estimating the rust levels and purity levels after cleaning manually or by machine (also with blasting).
Target audience: Blasting and painting companies and their clients, paint technicians, advice bureaux and industrial coating businesses.
Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning
Pictorial Standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition, with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near-white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
The RAL CLASSIC Colour Collection
The 4-digit RAL colors have been the standard for choosing colors for more than 70 years now. At the beginning the color collection included 40 different colors. Its number has risen to 213 today. The basic collection for matt color shades is called RAL 840-HR, the one for glossy color shades RAL 841-GL. Both basic collections contain color samples that are being used by important institutions to cover a wide range of applications and are constantly adapted to the requirements of the industry. The registers are being used as color samples for designs. They also contain safety- and signaling colors and fulfil the color requirements of DIN regulations.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
