No products in the cart.
Calibration Fluids
TQC SHEEN Calibration Oil 150 CPS @ 25C° +/- 0.2% – SH0156
TQC SHEEN Calibration Oil 150 CPS @ 25C° +/- 0.2% – SH0156
$183.00
TQC SHEEN Calibration Oil 150 CPS @ 25C° +/- 0.2% – SH0156
| Weight | .5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140
TAPE FOR ADHESION TEST (ISO 2409 1999) – SP3020 or SP3025
Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140TAPE FOR ADHESION TEST (ISO 2409 1999) – SP3020 or SP3025
Adhesion tape 3M 8981 50mx25mm
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
SKU: n/a - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000 - Climate Testing, Dewpoint, Temperature and Climatic Testing
Bacharach Sling Psychrometer – Certified
Bacharach type sling Psychrometer for indicating percent relative humidity on the basis of the wet bulb-dry bulb thermometer principle. The plastic case of the instrument is equipped with conversion scale for calculating the percent relative humidity.
Includes NIST Traceable Certification.
SKU: 0012-7012 - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
