No products in the cart.
Contact Angle Testing
Silicone Tubing L-Cannulas Pump Tubing, 2 pcs. – PG1027
Pump tubing (silicone) suitable for most Diiodomethane, 2 pcs
$475.00
Pump tubing (silicone) suitable for most Diiodomethane, 2 pcs
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- ASTM D1084, ASTM D5725, Contact Angle Testing, Tappi T588
DAT 1121 Dynamic Contact Angle Tester – PG1050 or DAT 1122 – PG1051
ASTM D1084, ASTM D5725, Contact Angle Testing, Tappi T588DAT 1121 Dynamic Contact Angle Tester – PG1050 or DAT 1122 – PG1051
DAT 1121 Dynamic Contact Angle Tester – PG1050 – or – DAT 1122 Dynamic Contact Angle Tester – PG1051
The DAT measures the contact angle (dynamic and static), surface tension, penetration, surface energy and spreading. The instrument uses a sophisticated camera to capture the fall/ shape of the drop, the shape on the sample and eventually the penetration. The pump and the camera work closely together. This is critical to have the correct amount of liquid and have each test start at the same time.
SKU: n/a - Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
SKU: VF1856
