No products in the cart.
Surface Profile
Shot Comparison Disc *NEUTRAL* – LD2049
Shot vergelijkingsschijf *NEUTRAAL* – LD2049
$172.00
Shot vergelijkingsschijf *NEUTRAAL* – LD2049
| Weight | .5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- ASTM D4417, Surface Characteristics Accessories, Surface Profile
Testex Replica Tape | Press-O-Film
Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.
1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.One box of Testex contains tape for 50 measurements.
SKU: n/a - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100
