No products in the cart.
Adhesion, Adhesion Accessories
Replacement Tape for PosiTest CH
Replacement tape rolls for the PosiTest CH Cross Hatch Adhesion Tester. Available for PosiTest CH ASTM Kit and PosiTest CH ISO Kit.
Replacement Tape
Roll of replacement tape for PosiTest CH Cross Hatch Adhesion Test
Available for PosiTest CH ASTM Kit and PosiTest CH ISO Kit.
Order Information
| Name | Order Code | |
| Replacement ISO Tape 1 Roll of ISO 2409/8502-3 Tape | CHDTISOTAPE | $25.00 |
| Replacement ASTM Tape 1 Roll of ASTM D3359 Tape | CHASTMTAPE | $45.00 |
For use with the PosiTest CH
| Weight | .5 lbs |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| Choose by Standard | ISO 2409/8502-3 Tape, ASTM D3359 Tape |
Related products
- Coating Thickness Gages, Dry Film Thickness, Film Thickness, Powder Coating
DeFelsko PosiTest DFT Coating Thickness Gage
Coating Thickness Gages, Dry Film Thickness, Film Thickness, Powder CoatingDeFelsko PosiTest DFT Coating Thickness Gage
The PosiTest DFT Coating Thickness Gage measures coatings on ALL metals. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments.SKU: n/a - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200
