No products in the cart.
Paint Charts and Panels, Uncategorized
Leneta Test Charts WDX, Box 500 PCS – VF3008
Leneta Test Charts WDX, Box 500 PCS – Form WDX is a sealed Plain White Card with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).
$172.00
Leneta Test Charts WDX, Box 500 PCS
Form WDX is a sealed Plain White Card with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Color | White |
|---|---|
| Size | 3-7/8 x 6 in (98 x 152 mm) |
| Box Quantity | 500 |
| Boxes per Case | 4 |
| Weight per box | 7 lb |
| Nominal Thickness | 20 mil, 0.5 mm |
Related products
- CurveX Tools and Supplies, Temperature, Temperature and Climatic Testing
CURVEX 3 BASIC DATALOGGER CX3005 or CX3010
CurveX Tools and Supplies, Temperature, Temperature and Climatic TestingCURVEX 3 BASIC DATALOGGER CX3005 or CX3010
The CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines.
The CX3005 is a 4-channel temperature datalogger built in a sturdy machined aluminium case that fulfils the basic needs for quality control in powder coating applications. Its ease of use and affordable price level makes it the ideal job-coaters instrument.
To use a CurveX 3 Basic to the fullest an insulation box, heat absorber/bracket and probes are necessary. All CurveX insulation boxes and CurveX probes, and the single heat absorber / bracket can be used with the CurveX 3 Basic. See the accessory list
CurveX 3 Basic features
• Operate through only 3 large buttons
• Meaningful feedback of multi coloured LED’s
• Factory calibrated for immediate use, calibration certificate included
• Downloads data through a standard USB port
• Rechargeable battery pack through USB connector
• Large memory of max. 160.000 readings
• Memory for 10 different batches, automatically overwrites the oldest results
• Programmable “paint type” memory for immediate “pass / fail” result
• Flat design, only 16 mm, for use in low clearance ovens
• Compatible with Ideal Finish Analysis softwareSKU: n/a - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
SKU: VF1856
