No products in the cart.
Build a Positector 6000 Kit with Probes
Build a PosiTector 6000 Kit with Probes
Build a customized PosiTector 6000 Kit with Probes at Great Lakes Gages with an array of coating thickness and other coating inspection probes
Build your own customized PosiTector 6000 kit with the specific gage body, probes, and case for use in all your coating inspection needs located in one convenient place.
Quick View
- Climate Testing, Coating Thickness Gages, Density, Dewpoint, Dry Film Thickness, Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Coating Thickness Gauge & Probes
Climate Testing, Coating Thickness Gages, Density, Dewpoint, Dry Film Thickness, Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Coating Thickness Gauge & Probes
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
SKU: n/a - Coating Thickness Gages, Dry Film Thickness, Film Thickness, PosiTector® 6000, Thickness Testing
Certified Coated Metal Plates & Certified Polystyrene Blocks
Coating Thickness Gages, Dry Film Thickness, Film Thickness, PosiTector® 6000, Thickness TestingCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a - Dry Film Thickness, PosiTector® 6000, Thickness Testing
Certified PosiTector® RTR Shim Set
Used to verify the accuracy and operation of PosiTector® RTR and other spring micrometer replica tape readers. Ideal for fulfilling both ISO and in-house quality control requirements. Includes Certificate of Calibration traceable to PTB. For use with the PosiTector® RTR H, PosiTector® RTR 3D
Accuracy: ±1.25 microns
SKU: STDCSSRTR - PosiTector 6000 Accessories, Surface Profile Gage Accessories
Non-Certified Metal Shim & Glass Zero Plate
PosiTector 6000 Accessories, Surface Profile Gage AccessoriesNon-Certified Metal Shim & Glass Zero Plate
- Provides a quick accuracy check of the instrument
- Allows the user to perform practice measurements
- Consists of a 76 μm (3 mil) check shim and a glass zero plate
- Labeled in both Metric and Imperial units
SKU: SPGZEROKIT - PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile
Cleaning Cards for PosiTector® RTR (20-Pack)
PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface ProfileCleaning Cards for PosiTector® RTR (20-Pack)
Pre-moistened with isopropyl alcohol to clean residual adhesive and debris from the anvils helping to insure an accurate test.
Every PosiTector RTR ships with (5) cleaning cards. Additional cards are available (20 cards per pack).
SKU: RTRCLEANCARD - PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
Testex™ Press-O-Film™ Replica Tape
PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesTestex™ Press-O-Film™ Replica Tape
Optical Grade XC Testex Replica Tape available — provides higher quality SDF surface data files than conventional replica tape (for use with PosiTector RTR 3D models).
Each roll of Testex Tape includes 50 pieces (Impressions).
SKU: n/a
| Heading 2 | Heading 3 | Heading 4 | Heading 5 | Heading 6 | Heading 7 | Heading 8 | |
|---|---|---|---|---|---|---|---|
| Coating Thickness | Row 1, Content 1 | Row 1, Content 2 | Row 1, Content 2 | Row 1, Content 2 | Row 1, Content 2 | Row 1, Content 2 | Row 1, Content 2 |
| Sample #2 | Row 2, Content 1 | Row 2, Content 2 | Row 2, Content 2 | Row 2, Content 2 | Row 2, Content 2 | Row 2, Content 2 | Row 2, Content 2 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 |
| Sample #3 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 |
| Sample #11 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
| Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 | Row 3, Content 2 |
